Software-update: Cura 5.8.0
Cura wordt ontwikkeld door UltiMaker om 3d-printen zo gemakkelijk en gestroomlijnd mogelijk te maken. Cura bevat alles wat je nodig hebt om een 3d-bestand te kunnen printen. Het werkt met alle UltiMaker-printers, maar ook met die van RepRap en Printrbot. Cura laat zich gemakkelijk installeren en bevat zowel de laatste firmware als de kalibratiebestanden voor de 3d-printer. Versie 5.7.2 van Cura is uitgekomen en hierin zijn de volgende verbeteringen aangebracht:
New Z Seam SettingsNew settings have been added that let you tweak how and where the Z seam is placed
"Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly"Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves #9369"Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supports
"Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly"Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves #9369"Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supportsTry it for yourself with this toast post-it holder.
Other ImprovementsA search bar has been added to the “Add an offline printer” list, resolves #16716Updated the retract behavior for a nozzle switch to reduce the chance of oozingUpdated Insert at Layer Change Post Processing Script so layers can be skipped
A search bar has been added to the “Add an offline printer” list, resolves #16716Updated the retract behavior for a nozzle switch to reduce the chance of oozingUpdated Insert at Layer Change Post Processing Script so layers can be skippedBug FixesFixed a bug that caused spiked objects to have missing layersUpdated the text in the Open Universal Cura Project (UCP) file to be more correctFixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves #5409Fix a bug where material_print_temp_prepend not being disabled, resolves #19204Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves #19156Fixed a bug where a slice would fail if the overhang angle was set to 90 degreesFixed a bug where infill lines are going through the model with a certain setting combination, resolves, #18970Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures
Fixed a bug that caused spiked objects to have missing layersUpdated the text in the Open Universal Cura Project (UCP) file to be more correctFixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves #5409Fix a bug where material_print_temp_prepend not being disabled, resolves #19204Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves #19156Fixed a bug where a slice would fail if the overhang angle was set to 90 degreesFixed a bug where infill lines are going through the model with a certain setting combination, resolves, #18970Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperaturesBugs resolved during the BetaFixed a bug where gaps would appear in generated tree support, resolves #19442Raft-related values that appeared incorrectly when switching extruders now show the correct valuesSeam not on Vertex has been fixed for multiple models on the buildplateExported cura:setting keys in material definitions now correctly shows True instead of yes.makerbot file types are now selected by default when saving those files to the Digital LibraryFor the UltiMaker Method series machines Support Interface, Tower, and Horizontal Expansion settings have been updated.For all UltiMaker Machines the Zseam settings have been updated so they are smartly hidden, except for the visual intents.
Fixed a bug where gaps would appear in generated tree support, resolves #19442Raft-related values that appeared incorrectly when switching extruders now show the correct valuesSeam not on Vertex has been fixed for multiple models on the buildplateExported cura:setting keys in material definitions now correctly shows True instead of yes.makerbot file types are now selected by default when saving those files to the Digital LibraryFor the UltiMaker Method series machines Support Interface, Tower, and Horizontal Expansion settings have been updated.For all UltiMaker Machines the Zseam settings have been updated so they are smartly hidden, except for the visual intents.Printer definitions, profiles, and materials:Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intentsImproved dual-support settings for UltiMaker Sline and Method printersExpanded and updated intents for Factor 4Updated CPE and PC settings to improve surface quality for Factor 4Introduced Creality Ender 3 V3 KEIntroduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350Introduced K1 MaxIntroduced Ankermake M5CIntroduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+
Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intentsImproved dual-support settings for UltiMaker Sline and Method printersExpanded and updated intents for Factor 4Updated CPE and PC settings to improve surface quality for Factor 4Introduced Creality Ender 3 V3 KEIntroduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350Introduced K1 MaxIntroduced Ankermake M5CIntroduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+
Source:
Tweakers.net