Home

Firmware-update: OpenWrt 23.05.4

Versie 23.05.4 van OpenWrt is uitgekomen. OpenWrt is alternatieve opensourcefirmware voor een groot aantal verschillende routers en embedded devices. Door middel van het opkg-package management system is er de mogelijkheid om zelf te bepalen wat de router allemaal wel en niet kan. Ook op GoT zijn er diverse mensen actief mee bezig; zie daarvoor dit topic. Bijwerken van de versie kan gewoon met sysupgrade vanuit de webinterface. De changelog voor deze uitgave kan hieronder worden gevonden.

Device support
  • Support for the following devices was added:ath79: Huawei AP5030DNmediatek: Unielec U7981-01mediatek: Xiaomi AX3000Tmediatek: Cudy TR3000 v1mediatek: Zbtlink ZBT-Z8103AXmediatek: Adtran SmartRG Bonanza Peak seriesmediatek: YunCore AX835mediatek: Comfast CF-E393AXmediatek: D-Link EAGLE PRO AI R32mediatek: JDCloud RE-CP-03mediatek: Netcore N60mediatek: D-Link AQUILA PRO AI M30mediatek: Cudy M3000 v1mpc85xx: Hewlett Packard MSM460ramips: D-Link DIR-806A B1ramips: Netgear EAX12 seriesramips: Edimax BR-6208AC V2ramips: Cudy TR1200 v1
  • ath79: Huawei AP5030DN
  • mediatek: Unielec U7981-01
  • mediatek: Xiaomi AX3000T
  • mediatek: Cudy TR3000 v1
  • mediatek: Zbtlink ZBT-Z8103AX
  • mediatek: Adtran SmartRG Bonanza Peak series
  • mediatek: YunCore AX835
  • mediatek: Comfast CF-E393AX
  • mediatek: D-Link EAGLE PRO AI R32
  • mediatek: JDCloud RE-CP-03
  • mediatek: Netcore N60
  • mediatek: D-Link AQUILA PRO AI M30
  • mediatek: Cudy M3000 v1
  • mpc85xx: Hewlett Packard MSM460
  • ramips: D-Link DIR-806A B1
  • ramips: Netgear EAX12 series
  • ramips: Edimax BR-6208AC V2
  • ramips: Cudy TR1200 v1
  • armsr: enable framebuffer emulation for virtio-gpu/drm displays used by Hetzner console
  • armsr: add Realtek and smsc Ethernet phy drivers to the default image
  • armsr: Renesas: RZ: Ethernet module and ttySC0
  • ipq40xx: Linksys WHW03 v2: enable additional 5 GHz channels
  • ipq40xx: Engenius EAP1300: Enable device
  • ipq40xx: NETGEAR EX6150v2: fix broken image generation
  • ipq806x: Meraki MR52: swap LAN LEDs
  • mediatek: backport multiple Ethernet fixes from master
  • mediatek: filogic: fix failsafe mode on devices with no lan1
  • mediatek: Xiaomi WR30U: drop device with NMBM layout
  • mediatek: Xiaomi WR30U: fix sysupgrade error
  • mpc85xx: Enterasys WS-AP3710i: fix boot
  • mpc85xx: Enterasys WS-AP3710i: fix eth mac-address
  • rockchip: improve stability and fix console
  • realtek: D-Link DGS-1210-16: Fix reboot hang
  • realtek: Trap LLDP packets to the CPU and do not forward
  • ramips: limit max spi clock frequency to 50 MHz
    • Various fixes and improvements
  • Added missing and fixed license information for multiple packages
  • Added CPE IDs to multiple packages
  • Fix communication with tethered iOS devices in CDC NCM mode
  • base-files: fix uid/gid auto-enumeration to avoid 16-bit limit
  • wifi-scripts: fix creation of IBSS in legacy (non-HT) mode
  • hostapd: don't ignore probe-requests with invalid DSSS params
  • mac80211: backport many (security) fixes
  • mac80211: add missing config for third 160MHz width for 5GHz radio
  • kernel: Add missing dependencies for kmod-fs-btrfs
  • kernel: allow installing kmod-ipt-tee and kmod-nft-dup-inet at the same time.
  • config: Enable ext4 journaling by default.
  • linux-firmware: package Intel AX201 firmware
    • Core components update
  • Update Linux from 5.15.150 to 5.15.162
  • Update mac80211 from 6.1.24 to 6.1.97-1
  • Update mt76 from 2023-09-11 to 2024-04-03
  • Update wireless-regdb from 2024.01.23 to 2024.07.04
  • Update libxml2 from 2.11.4 to 2.12.5
  • Update mbedtls from 2.28.7 to 2.28.8
  • Update OpenSSL from 3.0.13 to 3.0.14
  • Update wolfssl from 5.6.4 to 5.7.2
  • Update unetd from 2023-05-31 to 2024-03-31
  • Update ucode from 2023-11-07 to 2024-07-11
  • Update intel-microcode from 20240312 to 20240531

    • Source: Tweakers.net

    Previous

    Next