Software-update: RouterOS 7.13
MikroTik heeft versie 7.13 van RouterOS uitgebracht. RouterOS is een besturingssysteem dat zich richt op het uitvoeren van routertaken. Denk daarbij natuurlijk aan het routeren van netwerkverkeer, maar ook aan bandbreedtemanagement, een firewall, het aansturen van draadloze accesspoints, een hotspotgateway en een vpn-server. Het kan zowel op de hardware van MikroTik als op x86- of virtuele machines zijn werk doen. Voor het gebruik is een licentie nodig, die bij de aankoop van MikroTik-hardware is inbegrepen. De changelog voor deze uitgave kan hieronder worden gevonden.
Release 7.13Notice - Starting from RouterOS version 7.13, significant changes have been made to the RouterOS wireless packages. This is done due to a new product developemnt which will require more disk space for hardware drivers so we had to split it in order to maintain old products alongside the new ones. More wireless packages are yet to come.
1. When upgrading by using "check-for-updates", all versions earlier than 7.12 will display 7.12 as the latest available version. Upgrade from v7.12 to v7.13 or later versions must be done through 7.12 in order to convert wireless packages automatically. Fresh installation with Netinstall or manual package installation works in the same manner as always.
2. Drivers for older wireless and 60GHz interfaces, as well as the wireless management system CAPsMAN, are now part of a separate "wireless" package instead of being a part of the bundle package. This package can be uninstalled if not needed.
3. The existing "wifiwave2" package has been divided into distinct packages: "wifi-qcom" and "wifi-qcom-ac", and the necessary utilities for WiFi management are now included in the RouterOS bundle. RouterOS and "wifi-qcom-ac" packages alongside each other now fit into 16MB flash memory.
What's new in 7.13:package - convert "wireless" and "wifi" packages automatically, if upgrading from v7.12wifi - split existing "wifiwave2" package into separate packages "wifi-qcom", "wifi-qcom-ac", and include required utilities for WiFi management into bundlewireless - separate "wireless" package from bundle and build as a standalone packagebridge - added automatic "path-cost" values depending on interface ratebridge - added bridge interface property "port-cost-mode" with "short" and "long" argumentsbridge - fixed bogus VLAN entries from wifi when vlan-filtering is not enabledbridge - improved HW offload enablebridge - improved host flush when removing VLAN on HW offloaded bridgebth - added "VPN Prefer Relay Code" optionbth - improved automatic firewall rule generation processcertificate - add support for multiple DNS names for Let's Encryptcertificate - added HTTP redirect support for CRL downloadcertificate - added support for certificates with key size 16384certificate - fixed CRL updatingcertificate - fixed certificate auto renewal via SCEP when certificate contains "subject-alt-name"certificate - improved CRL signature verification and download error messagescertificate - improved initial certificate creation using SCEPcertificate - use error topic for CRL update failurescloud - improved re-connect speed after network related connection errorsconsole - added ":grep" commandconsole - added ":onerror" commandconsole - added ":serialize" and ":deserialize" commands for converting values to/from JSONconsole - added "interface" name when printing "interface/pppoe-server" entriesconsole - added "read" command under "file" menuconsole - added "where" functionality for "export" commandconsole - added flags to "print" command with "value-list"console - added interface helper for "gateway" property under "ip/route" menuconsole - added unset option for "ssid-regex" and "allow-signal-out-of-range" properties under "interface/wifi/access-list" menuconsole - clear console history when resetting configurationconsole - disallow setting existing "name" under "system/script" and "system/scheduler" menusconsole - fixed "export" boolean arguments when saving output to file using APIconsole - fixed "interface/ethernet/switch/port-isolation" exportconsole - fixed "on-event" argument highlighting under "system/scheduler" menuconsole - fixed graphic distortions in WinBoxconsole - fixed issue where API incorrectly asks for missing argumentsconsole - fixed printing to file using APIconsole - ignore negative values for ":delay" commandconsole - improved flag printing in certain menusconsole - improved stability when running "tool/ping" from APIconsole - removed "route-cache" setting from "ip/settings" menuconsole - replace reserved characters in file and script names with underscoresconsole - resolve "wifiwave2" directory to "wifi"console - show "l2vpn-link" address family under "routing/route" menuconsole - use more compact login screen for empty brandingdefconf - expire password when reverting configurationdefconf - fixed bogus wifi password on certain Audience devicesdefconf - fixed configuration for Audience with "wifi-qcom-ac" packagedefconf - fixed wireless band and channel-width selection (introduced in v7.12)defconf - hide default configuration for users without "sensitive" policydefconf - improved wifi interface detection after upgradedefconf - updated configuration with new "wifi" directorydefconf - use "WISP Bridge" default configuration mode for RBGrooveGA-52HPacn devicedefconf - use "fan-min-speed-percent=25" for CRS354-48P-4S+2Q+ devicedefconf - use device factory preset credentials when using CAPs modedefconf - use one SSID and enable FT when using "wifi" packagesdisk - fixed hang on reboot when network file systems mountedethernet - improved packet CPU core classifier for Alpine CPUs for non IPv4/IPv6 trafficethernet - improved system stability for L009 and hAP ax lite devicesfetch - added "http-auth-scheme" parameter, allows to select HTTP basic or digest authenticationfetch - added "http-content-encoding" settingfetch - added raw loggingfetch - allow to receive HTTP response headersfetch - require "ftp" user policyfirewall - added "nat-pmp" supportfirewall - added new IPv6 filter arguments "icmp-err-src-routing-header" and "icmp-headers-too-long" for "reject-with" settingfirewall - do not mark all IPv6 GRE packets as invalidfirewall - fixed IPv6 address-list timeoutfirewall - fixed altered address-list when upgrading from RouterOS v6firewall - fixed connections being tracked when tracking is disabledfirewall - removed "prohibited" and "unreachable" IPv4 address-type argumentsftp - improved upload and download speedshealth - dynamically add and remove invalid sensors (e.g. sfp-temperature)hotspot - fixed incorrect host moving to VLAN 0 when receiving packets through bridgeike2 - fixed ike2 double replyiot - fixed incorrect LoRa ACK packet handling during downlink messaging (introduced in v7.12)ipv6 - do not send out IPv6 RA deprecate message for re-used prefixisis - added IS-IS protocol support (CLI only)l3hw - fixed routing for IPsec encapsulated packetsleds - fixed LED indication in multi-APN setup for Chateauleds - improved LED indication during modem registration state for Chateaulog - added "fetch" topiclora - added CUPs protocol supportlora - fixed issue with lost LoRa configuration when rebooting the devicelte - added RNDIS support for neoway N75-EA modemlte - added support for FOTA firmware upgrade from custom URL for R11eL-FG621-EAlte - disabled IMS service for Chateau 5G on A1 HR networklte - fixed rare cases where Chateau 5G in passthrough mode may stop forwarding packetslte - improved SIM slot status change notification handling for MBIM modemslte - replaced "passthrough-subnet-selection" with "passthrough-subnet-size" setting (CLI only)lte - show each CA band in a new linemipsbe - improved system stability when removing USB devicesmmips - properly mount and unmount USB devicesmodem - added option to read SMS using MBIM interfacempls - added "te-tunnel" property for VPLS monitor (CLI only)mpls - fixed IPv6 RSVP-TEmpls - improved loggingnetinstall-cli - added more details to help messagesospf - fixed LSA Type3 advertisement for OSPFv2ospf - fixed missing OSPF interface on L2TP interface reconnectospf - fixed missing opaque bit in opaque LSAovpn - improved memory allocation during key-renegotiationovpn - removed "ping-timer-rem" option from client config filepackage - added warning log about missing "wireless" or "wifi" packagepimsm - improved elected BSR changepoe-out - improved firmware upgrade stability for AF/AT controlled boardsppc - fixed RouterOS bootup (introduced in v7.12)ppp - added remote-ipv6-prefix to IPv6 firewall address-list if "address-list" property is providedppp - allow at-chat and info commands in "waiting for packets" state for modems with shared data/info channelppp - improved IPv6 link-local address uniquenesspppoe-server - fixed connection count limit per license levelprofiler - improved "disk" and "supout.rif" classifiersqos-hw - added initial congestion avoidance support for 98DX224S, 98DX226S, and 98DX3236 switch chips (CLI only)qsfp - added support for QSFP-to-SFP adaptersqsfp - fixed supported rates for breakout cables (introduced in v7.12)quickset - show DDNS name as VPN address for devices with new style serial numberroute-filter - improved performancesfp - added "1G-baseT" link mode for modules that supports "2.5G-baseT" modesfp - allow 2.5G rates only in forced link modesfp - fixed link establishment with S+DA0001 DAC cablessfp - ignore irrelevant extended compliance code for SFP modulessfp - improved SFP interface handling for 98DX224S, 98DX226S, 98DX3236, 98DX8208, and 98DX8216 switch chipssfp - improved link establishment for SFP copper modulessfp - improved link establishment with certain modules for hEX S devicesfp - show 10M and 100M supported rates for RJ45 copper modulesssh - added cipher and hash function acceleration for ARM64 and x86 architecturesssh - fix error that caused large chunks of text not being pasted in their entirety into consolesupout - added VXLAN FDB sectionsupout - added multiple WiFi sectionsswitch - fixed service VLAN tagged IP multicast packets for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255 switchessystem - added "rtrace" debugging tool (CLI only)system - improved incoming and outgoing TCP connection performancesystem - improved internal process communication performancetraffic-generator - improved system stability when modifying interfacesusb - added support for RTL8152 USB ethernet on ARM, ARM64 and x86vpls - improved performance when decapsulating datavrf - fixed ICMP reply lookupwebfig - allow to display comments in multiline or compact modeswebfig - make table headers always visiblewebfig - use local storage for user preferenceswifi - added "flat-snoop" tool for surveying WiFi APs and stations (CLI only)wifi - added "radio-mac" variable for "name-format" provisioning settingwifi - added "remove" command in "capsman/remote-cap" menuwifi - after radar detections, avoid selection of channels not permitted by the userwifi - changed CAPsMAN generated certificate common namewifi - create first interface without number when using "name-format" provisioning settingwifi - enable protected interworking ANQP responseswifi - fixed EAP authentication failures when the Session-Timout RADIUS attribute is definedwifi - fixed occasional failures to start on 20/40mhz-eC channels for 2.4GHz 802.11ax interfaceswifi - fixed overridden datapath settings on CAP when unsetting from CAPsMANwifi - improved CAPsMAN stability during provisioningwifi - make slave APs use datapath bridge settings inherited from master by defaultwifi - removed "openflow-switch" settingwifi-qcom - added fast-path for received packetswinbox - added "Hw. Offload" property under "IP/Firewall/Filter" menuwinbox - added "Ping" button under "IP/DHCP Server/Leases" menuwinbox - added "Tx bps" and "Rx bps" monitor values under "WiFi/Registration" menuwinbox - added "none" argument for "Preshared Key" under "WireGuard/Peers" menuwinbox - added icon to entries under "WiFi/Access List" menuwinbox - added missing "qos-classifier" argument for "Hw. Caps" under "WiFi/Radios" menuwinbox - added missing arguments for "MAC Format" under "Wireless/Security Profiles/RADIUS" menuwinbox - allow opening entries under "WiFi/Registration" menuwinbox - fixed default "Name Format" property under "WiFi/Provisioning" menuwinbox - fixed minor typo under "Routing/BFD" menuwinbox - improved connection speedwinbox - updated "wireless" and "wifi" menuswireless - fixed "wlan1" default name for RBSXTsqG-5acD and RBLDFG-5acDwireless - fixed snooper information gathering from re-assocation requestswireless - keep configuration after manual package removal
package - convert "wireless" and "wifi" packages automatically, if upgrading from v7.12wifi - split existing "wifiwave2" package into separate packages "wifi-qcom", "wifi-qcom-ac", and include required utilities for WiFi management into bundlewireless - separate "wireless" package from bundle and build as a standalone packagebridge - added automatic "path-cost" values depending on interface ratebridge - added bridge interface property "port-cost-mode" with "short" and "long" argumentsbridge - fixed bogus VLAN entries from wifi when vlan-filtering is not enabledbridge - improved HW offload enablebridge - improved host flush when removing VLAN on HW offloaded bridgebth - added "VPN Prefer Relay Code" optionbth - improved automatic firewall rule generation processcertificate - add support for multiple DNS names for Let's Encryptcertificate - added HTTP redirect support for CRL downloadcertificate - added support for certificates with key size 16384certificate - fixed CRL updatingcertificate - fixed certificate auto renewal via SCEP when certificate contains "subject-alt-name"certificate - improved CRL signature verification and download error messagescertificate - improved initial certificate creation using SCEPcertificate - use error topic for CRL update failurescloud - improved re-connect speed after network related connection errorsconsole - added ":grep" commandconsole - added ":onerror" commandconsole - added ":serialize" and ":deserialize" commands for converting values to/from JSONconsole - added "interface" name when printing "interface/pppoe-server" entriesconsole - added "read" command under "file" menuconsole - added "where" functionality for "export" commandconsole - added flags to "print" command with "value-list"console - added interface helper for "gateway" property under "ip/route" menuconsole - added unset option for "ssid-regex" and "allow-signal-out-of-range" properties under "interface/wifi/access-list" menuconsole - clear console history when resetting configurationconsole - disallow setting existing "name" under "system/script" and "system/scheduler" menusconsole - fixed "export" boolean arguments when saving output to file using APIconsole - fixed "interface/ethernet/switch/port-isolation" exportconsole - fixed "on-event" argument highlighting under "system/scheduler" menuconsole - fixed graphic distortions in WinBoxconsole - fixed issue where API incorrectly asks for missing argumentsconsole - fixed printing to file using APIconsole - ignore negative values for ":delay" commandconsole - improved flag printing in certain menusconsole - improved stability when running "tool/ping" from APIconsole - removed "route-cache" setting from "ip/settings" menuconsole - replace reserved characters in file and script names with underscoresconsole - resolve "wifiwave2" directory to "wifi"console - show "l2vpn-link" address family under "routing/route" menuconsole - use more compact login screen for empty brandingdefconf - expire password when reverting configurationdefconf - fixed bogus wifi password on certain Audience devicesdefconf - fixed configuration for Audience with "wifi-qcom-ac" packagedefconf - fixed wireless band and channel-width selection (introduced in v7.12)defconf - hide default configuration for users without "sensitive" policydefconf - improved wifi interface detection after upgradedefconf - updated configuration with new "wifi" directorydefconf - use "WISP Bridge" default configuration mode for RBGrooveGA-52HPacn devicedefconf - use "fan-min-speed-percent=25" for CRS354-48P-4S+2Q+ devicedefconf - use device factory preset credentials when using CAPs modedefconf - use one SSID and enable FT when using "wifi" packagesdisk - fixed hang on reboot when network file systems mountedethernet - improved packet CPU core classifier for Alpine CPUs for non IPv4/IPv6 trafficethernet - improved system stability for L009 and hAP ax lite devicesfetch - added "http-auth-scheme" parameter, allows to select HTTP basic or digest authenticationfetch - added "http-content-encoding" settingfetch - added raw loggingfetch - allow to receive HTTP response headersfetch - require "ftp" user policyfirewall - added "nat-pmp" supportfirewall - added new IPv6 filter arguments "icmp-err-src-routing-header" and "icmp-headers-too-long" for "reject-with" settingfirewall - do not mark all IPv6 GRE packets as invalidfirewall - fixed IPv6 address-list timeoutfirewall - fixed altered address-list when upgrading from RouterOS v6firewall - fixed connections being tracked when tracking is disabledfirewall - removed "prohibited" and "unreachable" IPv4 address-type argumentsftp - improved upload and download speedshealth - dynamically add and remove invalid sensors (e.g. sfp-temperature)hotspot - fixed incorrect host moving to VLAN 0 when receiving packets through bridgeike2 - fixed ike2 double replyiot - fixed incorrect LoRa ACK packet handling during downlink messaging (introduced in v7.12)ipv6 - do not send out IPv6 RA deprecate message for re-used prefixisis - added IS-IS protocol support (CLI only)l3hw - fixed routing for IPsec encapsulated packetsleds - fixed LED indication in multi-APN setup for Chateauleds - improved LED indication during modem registration state for Chateaulog - added "fetch" topiclora - added CUPs protocol supportlora - fixed issue with lost LoRa configuration when rebooting the devicelte - added RNDIS support for neoway N75-EA modemlte - added support for FOTA firmware upgrade from custom URL for R11eL-FG621-EAlte - disabled IMS service for Chateau 5G on A1 HR networklte - fixed rare cases where Chateau 5G in passthrough mode may stop forwarding packetslte - improved SIM slot status change notification handling for MBIM modemslte - replaced "passthrough-subnet-selection" with "passthrough-subnet-size" setting (CLI only)lte - show each CA band in a new linemipsbe - improved system stability when removing USB devicesmmips - properly mount and unmount USB devicesmodem - added option to read SMS using MBIM interfacempls - added "te-tunnel" property for VPLS monitor (CLI only)mpls - fixed IPv6 RSVP-TEmpls - improved loggingnetinstall-cli - added more details to help messagesospf - fixed LSA Type3 advertisement for OSPFv2ospf - fixed missing OSPF interface on L2TP interface reconnectospf - fixed missing opaque bit in opaque LSAovpn - improved memory allocation during key-renegotiationovpn - removed "ping-timer-rem" option from client config filepackage - added warning log about missing "wireless" or "wifi" packagepimsm - improved elected BSR changepoe-out - improved firmware upgrade stability for AF/AT controlled boardsppc - fixed RouterOS bootup (introduced in v7.12)ppp - added remote-ipv6-prefix to IPv6 firewall address-list if "address-list" property is providedppp - allow at-chat and info commands in "waiting for packets" state for modems with shared data/info channelppp - improved IPv6 link-local address uniquenesspppoe-server - fixed connection count limit per license levelprofiler - improved "disk" and "supout.rif" classifiersqos-hw - added initial congestion avoidance support for 98DX224S, 98DX226S, and 98DX3236 switch chips (CLI only)qsfp - added support for QSFP-to-SFP adaptersqsfp - fixed supported rates for breakout cables (introduced in v7.12)quickset - show DDNS name as VPN address for devices with new style serial numberroute-filter - improved performancesfp - added "1G-baseT" link mode for modules that supports "2.5G-baseT" modesfp - allow 2.5G rates only in forced link modesfp - fixed link establishment with S+DA0001 DAC cablessfp - ignore irrelevant extended compliance code for SFP modulessfp - improved SFP interface handling for 98DX224S, 98DX226S, 98DX3236, 98DX8208, and 98DX8216 switch chipssfp - improved link establishment for SFP copper modulessfp - improved link establishment with certain modules for hEX S devicesfp - show 10M and 100M supported rates for RJ45 copper modulesssh - added cipher and hash function acceleration for ARM64 and x86 architecturesssh - fix error that caused large chunks of text not being pasted in their entirety into consolesupout - added VXLAN FDB sectionsupout - added multiple WiFi sectionsswitch - fixed service VLAN tagged IP multicast packets for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255 switchessystem - added "rtrace" debugging tool (CLI only)system - improved incoming and outgoing TCP connection performancesystem - improved internal process communication performancetraffic-generator - improved system stability when modifying interfacesusb - added support for RTL8152 USB ethernet on ARM, ARM64 and x86vpls - improved performance when decapsulating datavrf - fixed ICMP reply lookupwebfig - allow to display comments in multiline or compact modeswebfig - make table headers always visiblewebfig - use local storage for user preferenceswifi - added "flat-snoop" tool for surveying WiFi APs and stations (CLI only)wifi - added "radio-mac" variable for "name-format" provisioning settingwifi - added "remove" command in "capsman/remote-cap" menuwifi - after radar detections, avoid selection of channels not permitted by the userwifi - changed CAPsMAN generated certificate common namewifi - create first interface without number when using "name-format" provisioning settingwifi - enable protected interworking ANQP responseswifi - fixed EAP authentication failures when the Session-Timout RADIUS attribute is definedwifi - fixed occasional failures to start on 20/40mhz-eC channels for 2.4GHz 802.11ax interfaceswifi - fixed overridden datapath settings on CAP when unsetting from CAPsMANwifi - improved CAPsMAN stability during provisioningwifi - make slave APs use datapath bridge settings inherited from master by defaultwifi - removed "openflow-switch" settingwifi-qcom - added fast-path for received packetswinbox - added "Hw. Offload" property under "IP/Firewall/Filter" menuwinbox - added "Ping" button under "IP/DHCP Server/Leases" menuwinbox - added "Tx bps" and "Rx bps" monitor values under "WiFi/Registration" menuwinbox - added "none" argument for "Preshared Key" under "WireGuard/Peers" menuwinbox - added icon to entries under "WiFi/Access List" menuwinbox - added missing "qos-classifier" argument for "Hw. Caps" under "WiFi/Radios" menuwinbox - added missing arguments for "MAC Format" under "Wireless/Security Profiles/RADIUS" menuwinbox - allow opening entries under "WiFi/Registration" menuwinbox - fixed default "Name Format" property under "WiFi/Provisioning" menuwinbox - fixed minor typo under "Routing/BFD" menuwinbox - improved connection speedwinbox - updated "wireless" and "wifi" menuswireless - fixed "wlan1" default name for RBSXTsqG-5acD and RBLDFG-5acDwireless - fixed snooper information gathering from re-assocation requestswireless - keep configuration after manual package removal
Source:
Tweakers.net