Home

Software-update: Cura 5.6.0

Cura wordt ontwikkeld door UltiMaker om 3d-printen zo gemakkelijk en gestroomlijnd mogelijk te maken. Cura bevat alles wat je nodig hebt om een 3d-bestand te kunnen printen. Het werkt met alle UltiMaker-printers, maar ook met die van RepRap en Printrbot. Cura laat zich gemakkelijk installeren en bevat zowel de laatste firmware als de kalibratiebestanden voor de 3d-printer. Versie 5.6.0 van Cura is uitgekomen en hierin zijn de volgende veranderingen en verbeteringen aangebracht:

New features and improvements
  • Introduced the MethodX and MethodXL printers with it's materials and the option to write to .makerbotA year after the merger of Ultimaker and MakerBot, we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release, users can find profiles for our Method X and Method XL printers, as well as material profiles for ABS-R, ABS-CF, and RapidRinse
  • Prime tower base settings increase the stability of large prime towersNew settings have been released that let you modify the base of your prime tower. The new settings are:Prime Tower Base SizePrime Tower Base HeightPrime Tower Base SlopePrime Tower Raft Line SpacingYou can modify these settings to help improve the reliability of your prime towers. You can also use them to calibrate how well your prime tower adheres to the build plate for increased print success, or to avoid over-adhesion that may damage your build plate.
  • Prime Tower Base Size
  • Prime Tower Base Height
  • Prime Tower Base Slope
  • Prime Tower Raft Line Spacing

    • You can modify these settings to help improve the reliability of your prime towers. You can also use them to calibrate how well your prime tower adheres to the build plate for increased print success, or to avoid over-adhesion that may damage your build plate.

  • The Start and End gcodes now accept variables and math including the variablesCura can now accept more start and end gcodes that include math, for example:G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y-prime_tower_size/2} F6000M109 S{material_final_print_temperature}This hopefully also solves issues like #14111 (comment) and #16012 (comment)

    • The Start and End gcodes now accept variables and math including the variablesCura can now accept more start and end gcodes that include math, for example:

    This hopefully also solves issues like #14111 (comment) and #16012 (comment)

  • Other ImprovementsIntroduced the setting for Raft Line Spacing, but for the prime towerUpdated the Support Z Distance to allow for more different values, no longer only multiple layerheights, solves #6105

    • Other Improvements

  • Introduced the setting for Raft Line Spacing, but for the prime tower
  • Updated the Support Z Distance to allow for more different values, no longer only multiple layerheights, solves #6105
    • Bug Fixes
  • Fixed a crash for some Linux users when trying to open the file menu
  • Introduced Balanced and Solid profiles for 1C cores to UltiMaker Method X and Method XL
  • Improved self-support for UltiMaker MethodX and MethodXL printers so the support extruder will not be used
  • The prime tower is now always enabled when the second extruder is used for the MethodX and MethodXL printers
  • Updated the default prime tower position so it doesn't prevent slicing for some printers
  • Fixed an issue where raft layers were partially printed
  • Slice information template variables were not available through start-end code formulas
  • Resolved an issue with 100% support roof for tree support
    • Printer Definitions, and Community Translations
  • Introduced Ender 3 V3 SE
  • Updated bridge flows for UltiMaker PLA, TPLA and ABS to address pillowing in AA 0.8 for UltiMaker printers
  • Updated Spanish translation for Lightning infill
  • Updated German translation for Laying object flat on buildplate
  • Updated Brazilian translations
    • Known Issues
  • The predicted printing time for dual extrusion printjobs on the Method series are deviating from the actual printing time.
  • It’s not possible yet, to use Method series printers with Digital Factory. We hope to resolve this for the next release.
    • New Engine Plugin

    Not related to this release but nice to mention is that there is a new plugin has been created by the Cura team that makes use of the improved engine plugin capabilities introduced in Cura 5.5 (as mentioned #15629). The plugin is called CuraEngine Tiled Infill Generation and it allows users to select from an expanded list of infill patterns, as well as allowing users to add their own infill pattern by uploading a *.wtk file. This plugin is just a taste of what is now possible when creating Cura plugins. We look forward to seeing what the Cura community creates next!

    Source: Tweakers.net

    Previous

    Next