Software-update: Cura 5.4.0

Cura wordt ontwikkeld door UltiMaker om 3d-printen zo gemakkelijk en gestroomlijnd mogelijk te maken. Cura bevat alles wat je nodig hebt om een 3d-bestand te kunnen printen. Het werkt met alle UltiMaker-printers, maar ook met die van RepRap en Printrbot. Cura laat zich gemakkelijk installeren en bevat zowel de laatste firmware als de kalibratiebestanden voor de 3d-printer. Versie 5.4.0 van Cura is uitgekomen en hierin zijn de volgende veranderingen en verbeteringen aangebracht:

Improved slicing time for Tree SupportIntroduced 10 new settings and updated 2 so anyone can tune the behaviorUpdated options for Tree Support Rest Preference to be more correctFixed a bug where Tree Support would generate unsupported islandsFixed a bug where slicing would fail if Preference was set to On Any Flat SurfaceFixed a bug where branches were not generated when Support Interface was enabled.Fixed a bug where the Support Overhang Angle caused a crash with Tree SupportFixed a bug where the Support Interface was not correctly generated with Tree Support

Introduced the Smart Brim setting that changes the order in which the brim lines are printed making them easier to remove. Try it for yourself with this Cura Cookie Cutter.

Updated the UltiMaker logo to reflect the new company logoAdded support for the updated mainboard revisions of UltiMaker S3, S5, and S7Introduced Hole Horizontal Expansion Max Diameter so only the expansion of smaller holes can be tuned while leaving larger holes untouched.Introduced Skirt Height setting to make a skirt easier to removeImproved the minimum layer time for printers with multiple extruders.Improved accuracy of when the M104 Hotend Temperature command is addedImproved printing order of the prime tower to include a dual brim, primed every layer, and primed before and after the extruder switch.Improved behavior for opening and closing categories when adding a new printerRemoved the settings related to Wire Printing since it was broken and barely used.Upgraded PyQt to version 6.4.2 which improves responsiveness in the UI

Fixed a bug where the brim line would not be printed in the same orientationFixed a bug where models dropped to the buildplate when they were supposed to be floatingFixed a bug where models would overlap if multiple models were loaded at the same timeFixed a bug where an error would be shown too often in One At A Time print sequenceFixed a bug where the message for a new Beta version available would show up during the Beta.Fixed a bug where ESun PLA+ would display unsupported.Fixed a bug where the printjob name was hard to read in darkmodeFixed a bug where the Minimum Layer Time was incorrectly interpolatedFixed a bug where Cura would crash on star-up for some Linux systems because of missing SimpleButtonFixed a bug where the Post Processing Plugin would create extra foldersFixed AppImage Icon for Linux systemsFixed a bug where the buildplate temperature in the USB printing monitor was not roundedFixed a bug where retracting for Filament Change was not performed correctly because of an extra /n in the gcode.Fixed a bug where the material estimation would not show currencies correctly.

Fixed a bug where undesirable micro-segments would introduce jagged paths on curved surfaces.Fixed a bug where it was not possible to use custom support and brim meshesFixed a bug Cura would not start when upgrading from a Cura 5.4 NightlyFixed a bug where Connect Top/Bottom Polygons would cause a slicing crashFixed a bug where generic materials were missing for some printersFixed a bug where Support Horizontal Expansion would be incorrectly applied to tree supportsFixed a bug where nozzles were missing from the Elegoo Neptune 3 Plus.

Introduced UltiMaker PET CF with Annealing and Engineering intentsUpdated Infill- and Skin Overlap settings for UltiMaker printersEnabled a modest Support Brim by default for UltiMaker printersUpdated Support Interface speeds for PVA for UltiMaker printersAdded Gutenberg G-ZeroAdded Hellbot Magna SE 300, and Magna SE ProAdded Kingroon KP3S ProAdded LNL3D D3, D3 Vulcan, D5 and D6Added Longer LK4 XAdded Mixware Hyper K, Hyper S, Vulcan, and WandAdded Snapmaker 2 A150, A250 an A350 dual extruder printersAdded Sovol SV04Added Sovol SV06 plus, and updated Sovol SV06Added WeeFun Tina2, and WeeFun Tina2Updated Creality 3 S1, Creality 3 S1 Plus, and Creality 3 S1 ProUpdated Cremaker profile to remove material temperature boost

Updated Brazilian translations

Support Brim is missing if the Buildplate Adhesion is set to None. We are tracking reports here.Hide seam is actually not hidden and can give random results, for now changing the Seam Corner Preference to None will give better results. We are tracking reports here.Combing Not In Skin can result in unexpected stringing. We are tracking reports here.Multiple external monitors on Windows (especially if from the same brand) might be a problem under some circumstances.Does Cura (not) work on your OS (version)? See this article for clarification.The provided mac builds have signing issues, these signing issues will be resolved